From World Afropedia
Jump to: navigation, search

Link to CEB Press Build June 2015

<html><iframe src="" width="500" height="281" frameborder="0" webkitAllowFullScreen mozallowfullscreen allowFullScreen></iframe>

<a href="">The CEB Story 2012.</a> from <a href="">Open Source Ecology</a> on <a href="">Vimeo</a>.



CEB Press (aka "The Liberator")

The Liberator is OSE's automatic, high throughput Compressed Earth Brick Press. It is named The Liberator because it is intended to free people from the single highest cost of living - housing. See Cost of Living and GVCS Naming Convention.

The CEB is at product release status and is being actively manufactured at Factor e Farm. The presses was used heavily as a part of the Factor e Farm Infrastructure Buildout 2011. See latest press release on the MicroHouse 4 built in 2014 - [1]

The bill of materials cost of the machine is $3000-5500, depending on the version and build process. The machine versions include:

  • manual hydraulic controls
  • digitally cut parts or stock steel sections
  • small or large hopper
  • with or without hopper shaker
  • automatic controller at 5 bricks per minute
  • automatic controller at 10 bricks per minute

We are currently selling the full machine for $11k (specifications below). Our next production run will be in June 2015 CEB 100, and we are currently accepting orders. Terms are 1/2 down payment to secure the order and the other half, including shipping cost, paid after machine completion and prior to the shipment. Proceeds are put back 100% into the operation to fund further research and development. - updated Jan. 23, 2014


  • Version 6 is our current model; exhaustive documentation release comming 4/30/15
  • Open source hardware, controller, and software (CC-BY-SA, GPL)
  • Controller includes automatic pressing and manual mode
  • Does NOT come with a power source - it is powered by a hydraulic power source, such as by our Power Cube or a tractor hydraulic take-off.
  • Full size bricks are 4"x6"x12", plain flat-faced bricks
  • Brick height is adjustable from 1"-4"
  • Brick dimensional variations: +/- 1/16". Soil uniformity will determine height uniformity of brick.
  • 6 full-sized bricks per minute at 14 gallon per minute hydraulic flow. Brick pressing rate will increase with a higher hydraulic flow, up to the maximum rated flow of the hydraulic solenoid. At a flow >14 gpm, the secondary cylinder and shaker motor are throttled down to reduce their speed. Hydraulic solenoid valve is rated for a maximum of 30 gpm fluid flow at 3000PSI
  • Fuel consumption with Power Cube running at 14 gpm fluid flow - about 1 gallon per hour
  • System hydraulic pressure - 2300 psi
  • Comes with hydraulic quick couplers ready to be connected to a power source
  • Weight - 1700 lb
  • Moving: brick press is moved with forks. Footprint (with legs in the inner position) allows machine to be placed in the bed of a 3/4 ton pickup. It has adjustable legs for uneven terrain. Machine can be moved around on a trailer (not included)
  • Material cost: $4500-$6500 depending on sourcing; manual machine (without hydraulic solenoid, machine costs $1000 less in materials
  • 3'x6' grate for tractor loading. Includes soil deflectors
  • Includes hopper shaker to help soil move down the hopper
  • Known bugs: machine has currently been tested in multiple day production runs and is stable at 6 bricks per minute. When solenoid valve ran with 2 Power Cubes at 28 gpm fluid flow, the valve would lock up from time to time. May be software, solenoid design, or Power Cube stacking issues, and requires detailed analysis. This bug was not seen when a larger diesel engine was used to power the brick press in 2010 at 30 gpm fluid flow.


See CEB Press Genealogy


The CEB Press takes earth/dirt/soil and compresses it tightly to make solid blocks useful for building. Compressed earth blocks have many advantages as a building material: by making the building materials from the readily available dirt on the building site, they eliminate the need to transport bricks from elsewhere, reducing financial cost and environmental impact. Compressed earth blocks are very strong and insulate well against both heat and sound, making for very energy-efficient building (especially combined with the energy savings from not needing to transport them from offsite). Best of all, the material they use is already on-site and does not need to be purchased -- quite literally, dirt-cheap! See the wiki page on Compressed Earth Blocks and the CEB category for more details on building using CEBs.

The Liberator has been fully designed and tested by the Open Source Ecology team. Because the Liberator is an open source technology, you can freely download instructions to build your own from materials you can obtain yourself, or contact opensourceecology[at]gmail[dot]com to buy a kit or a finished machine.

Building a machine yourself might seem intimidating, but every step of the process is fully documented and the OSE community is available on our discussion forums if you need help, advice, or a little hand-holding.

Using the CEB Press, two people can build a 6 foot high (1.83m) round wall, 20 feet (6.1m) in diameter, 1 foot (30cm) thick, in one 8 hour day, though construction time will vary somewhat depending on preparation time, what equipment is available (tractor to prepare the ground and move the blocks where they need to go), the quality of the soil, and other factors. The bigger the block size, the faster a wall can be erected, but at the cost of heavier blocks that are more of a strain to work with. Blocks from The Liberator average 25 pounds (11.3kg).

See CEB Design for more information.

Product Ecology





See Also

The Global Village Construction Set
Habitat CEB Press Cement Mixer Sawmill Bulldozer Backhoe
Agriculture Tractor Seeder Hay Rake Well-Drilling Rig
Microtractor Soil Pulverizer Spader Hay Cutter Trencher
Bakery Oven Dairy Milker Microcombine Baler
Industry Multimachine Ironworker Laser Cutter Welder Plasma Cutter
CNC Torch Table Metal Roller Rod and Wire Mill Press Forge Universal Rotor
3D Printer 3D Scanner CNC Circuit Mill Industrial Robot Chipper Hammermill
Drill Press Induction Furnace
Energy Power Cube Gasifier Burner Solar Concentrator Electric Motor Generator Hydraulic Motor
Steam Engine Heat Exchanger Wind Turbine Pelletizer Universal Power Supply
Nickel-Iron Battery
Materials Aluminum Extractor Bioplastic Extruder
Transportation Car Truck

Imprimante 3D Scanner 3D Extracteur d'Aluminum Pelleteuse Four à Pain Presse à balles de paille Extrudeuse à bioplastiques Bulldozer Voiture Presse BTC Betonnière Broyeur à marteaux Imprimante de circuits électroniques Table de découpe numérique Trayeuse Perçeuse à colonne Moteur électrique Gazogène Faucheuse Râteau à foin Moteur hydraulique Fourneau à induction Bras robotisé Poinçonneuse Découpeur Laser Laminoir à plaques Microcombine Microtracteur Multimachine Batterie Ni-Fe Machine à granulés Torche plasma Power Cube Presse hydraulique Laminoir à barres et fils de fer Pulvérisateur de terre Scierie Semoir Concentrateur solaire Roto-bêche Moteur à vapeur Echangeur de chaleur Tracteur Fraiseuse de tranchée Camion Alimentation électrique universelle Rotor universel Poste de soudure à l'arc Plateforme de forage de puits Eolienne

Key Design Planning Prototype Almost done Full Release